SE Series 4-Passage Rotary Unions & Joints
DSTI 4-passage SE Series rotary unions feature four independent flow passages and are designed for applications with high pressure requirements and tight spatial constraints.
SE 4-passage models come standard with threaded connections on the sides of the shaft and housing. Models are also available with optional shaft O-ring glands for face/flush mounting (which must be specified when ordering).
Need to combine fluid with electrical power, signal and/or data transfer? No problem. The SE Series rotary unions are designed to integrate directly with our standard electrical slip rings. See options.
|Part #||Connection||Passage Size||Diameter||Length||Through Bore||Min. Torque*||Part Downloads||Information|
|SE-1141 [SEM-1141]||#4 SAE [G1/8"-28 BSPP]||0.187" [4.75 mm]||2.937" [74.6 mm]||4.828" [122.631 mm]||0.375" [9.525 mm]||38 in-lbs [4.29 Nm]||Get Quote|
*Minimum torque required to rotate based on zero pressure.
- 1Side Threaded Connections (Standard)
- 2Optional Face/Flush Mounting Connections (Not Threaded)
- 3Threaded Mounting Holes
All values listed under Technical Specifications are dependent on a combination of all application parameters. Please note operational life is dependent upon both rotational speed and duty cycle. Contact DSTI if your application requires operating close to the maximum rotational speed with a continuous duty cycle. Applications with temperatures above 220° F (105° C) require alternative seal materials. Please consult with DSTI regarding your specific application requirements.
Easier and less expensive than you may think. We can modify our standard products to fit your project requirements.Learn More
Electrical Slip Ring Integration
Get the complete package. We offer a wide range of electrical slip rings designed to directly integrate with our SE Series rotary unions.View Options