Rotary Unions SE Series
SE Series 16-Passage Rotary Unions & Joints
DSTI 16-passage SE Series rotary unions feature 16 independent flow passages and are designed for applications with high pressure requirements and tight spatial constraints.
SE 16-passage models come standard with threaded connections on the sides of the shaft and housing. Models are also available with optional shaft O-ring glands for face/flush mounting (which must be specified when ordering).
Need to combine fluid with electrical power, signal and/or data transfer? No problem. The SE Series rotary unions are designed to integrate directly with our standard electrical slip rings. See options.
Configurations
Part # | Connection | Passage Size | Diameter | Length | Through Bore | Min. Torque* | Part Downloads | Information |
---|---|---|---|---|---|---|---|---|
SE-11161 [SEM-11161] | #4 SAE-ORB [G1/8"-28 BSPP] | 0.187" [4.75 mm] | 4.437" [112.7 mm] | 13.700" [347.981 mm] | 0.375" [9.525 mm] | 166 in-lbs [18.76 Nm] | Buy Now |
*Minimum torque required to rotate based on zero pressure with Oil/Hydraulic media (or Air/Gas media for SPS Series). Required torque to rotate may be greater when using other media types or dry running. For specific torque requirements, please contact DSTI to discuss your application.
Technical Specifications
- 1Standard, Radial SAE-ORB or BSPP Connections (Plugged if Axial Connection Type is Ordered)
- 2Optional, Axial O-Ring Face Seal Connections (Must Specify At Time Of Order)
- 3Threaded Mounting Holes
*Suitable Water/Glycol or Coolant media must have rust inhibitors present. Oil/Hydraulic media must be petroleum-based. Please consult with DSTI for approval. All values listed under Technical Specifications are dependent on a combination of all application parameters. Please note operational life is dependent upon both rotational speed and duty cycle. Contact DSTI if your application requires operating close to the maximum rotational speed with a continuous duty cycle. Applications with temperatures above 220° F (105° C) require alternative seal materials. The use of Water media with temperatures above 212° F (100° C) require alternative seal materials. Please consult with DSTI regarding your specific application requirements.
Available Options
Custom Modifications
Easier and less expensive than you may think. We can modify our standard products to fit your project requirements.
Learn MoreElectrical Slip Ring Integration
Get the complete package. We offer a wide range of electrical slip rings designed to directly integrate with our SE Series rotary unions.
View Options