GPS Series 8-Passage Rotary Unions & Joints
The 8-passage, GPS Series rotary unions feature specialized sealing technology suitable for vacuum and bidirectional pressures and eight independent flow passages capable of transferring different media types simultaneously.
The stainless steel construction is suitable for hydraulic, pneumatic, coolant, water, and other corrosive media types. Carbon steel models are available for applications that do not require water or corrosive media transfer (see GP Series).
GPS 8-passage models with NPT thread connections consist of a unique shaft configuration for easier installation, allowing the choice of mounting the shaft connections using the threaded passages or O-ring face seal glands for flush mounting the union to an interface. GPS 8-passage models with BSPP thread connections are not available with O-ring face seal glands.
Need to combine fluid with electrical power, signal and/or data transfer? No problem. The GPS Series rotary unions are designed to integrate directly with our standard electrical slip rings. See options.
|Part #||Connection||Passage Size||Diameter||Length||Through Bore||Min. Torque*||Part Downloads||Information|
|GPS-180 [GPSM-180]||1/8"-27 NPT [G1/8"-28 BSPP]||0.156" [3.962 mm]||3.437" [87.3 mm]||7.488" [190.196 mm]||None||10.4 ft-lbs [14.1 Nm]||Buy Now|
|GPS-280 [GPSM-280]||1/4"-18 NPT [G1/4"-19 BSPP]||0.250" [6.35 mm]||4.250" [107.95 mm]||9.609" [244.069 mm]||None||15.4 ft-lbs [20.88 Nm]||Buy Now|
|GPS-380 [GPSM-380]||3/8"-18 NPT [G3/8"-19 BSPP]||0.375" [9.525 mm]||4.937" [125.4 mm]||10.000" [254.001 mm]||None||26.4 ft-lbs [35.79 Nm]||Buy Now|
|GPS-480 [GPSM-480]||1/2"-14 NPT [G1/2"-14 BSPP]||0.500" [12.7 mm]||5.625" [142.875 mm]||10.000" [254.001 mm]||None||32.5 ft-lbs [44.06 Nm]||Buy Now|
*Minimum torque required to rotate based on zero pressure with oil/hydraulic media. Required torque to rotate may be greater when using other media types or dry running. For specific torque requirements, please contact DSTI to discuss your application.
*Some applications using Chemical media may require alternative sealing materials. Applications above 220° F (105° C) require alternative seal materials. Please consult with DSTI for approval. All values listed under Technical Specifications are dependent on a combination of all application parameters. Please note operational life is dependent upon both rotational speed and duty cycle. Contact DSTI if your application requires operating close to the maximum rotational speed with a continuous duty cycle. Applications with temperatures above 220° F (105° C) require alternative seal materials. Please consult with DSTI regarding your specific application requirements.
Easier and less expensive than you may think. We can modify our standard products to fit your project requirements.Learn More
Electrical Slip Ring Integration
Get the complete package. We offer a wide range of electrical slip rings designed to directly integrate with our GPS Series rotary unions.View Options