GPS Series 12-Passage Rotary Unions & Joints
The 12-passage, GPS Series rotary unions feature specialized sealing technology suitable for vacuum and bidirectional pressures and twelve independent flow passages capable of transferring different media types simultaneously.
The stainless steel construction is suitable for hydraulic, pneumatic, coolant, water, and other corrosive media types. Carbon steel models are available for applications that do not require water or corrosive media transfer (see GP Series).
GPS 12-passage models come standard with NPT or BSPP thread connections on the sides of the shaft and housing. Optional O-ring face seal glands are available for both NPT and BSPP thread connection models (must be specified when ordering).
Need to combine fluid with electrical power, signal and/or data transfer? No problem. The GPS Series rotary unions are designed to integrate directly with our standard electrical slip rings. See options.
|Part #||Connection||Passage Size||Diameter||Length||Through Bore||Min. Torque*||Part Downloads||Information|
|GPS-201-12 [GPSM-201-12]||1/4"-18 NPT [G1/4"-19 BSPP]||0.250" [6.35 mm]||4.437" [112.7 mm]||13.380" [339.853 mm]||0.750" [19.05 mm]||19.2 ft-lbs [26.03 Nm]||Buy Now|
|GPS-301-12 [GPSM-301-12]||3/8"-18 NPT [G3/8"-19 BSPP]||0.375" [9.525 mm]||4.937" [125.4 mm]||15.370" [390.399 mm]||0.750" [19.05 mm]||26.2 ft-lbs [35.52 Nm]||Buy Now|
*Minimum torque required to rotate based on zero pressure.
- 1Standard Threaded Side Connections (Plugged if O-ring Face Seal Gland Option is Specified)
- 2Optional, Non-threaded O-ring Face Seal Glands for Flush Mounting (Must Be Specified When Ordered)
- 3Threaded, Interface Mounting Holes
*Some applications using Chemical media may require alternative sealing materials. Applications above 220° F (105° C) require alternative seal materials. Please consult with DSTI for approval. All values listed under Technical Specifications are dependent on a combination of all application parameters. Please note operational life is dependent upon both rotational speed and duty cycle. Contact DSTI if your application requires operating close to the maximum rotational speed with a continuous duty cycle. Applications with temperatures above 220° F (105° C) require alternative seal materials. Please consult with DSTI regarding your specific application requirements.
Easier and less expensive than you may think. We can modify our standard products to fit your project requirements.Learn More
Electrical Slip Ring Integration
Get the complete package. We offer a wide range of electrical slip rings designed to directly integrate with our GPS Series rotary unions.View Options