SCS Single Passage Rotary Union

The SCS Series rotary unions feature Tri-Clamp© sanitary connections and an FDA approved design for use with CIP (Clean-in-Place) systems.

The SCS Series are engineered to minimize fluid stagnation points with smooth flow lines for clean fluid transfer. Specialized bearings are located in a sealed chamber designed keep lubricants in and contaminants out. The SCS Series feature two tapped ports in the housing for entry and exit of cleaning fluid to a flush chamber behind the main dynamic seal.

Installation Support

Request Quote / Info

Specifications
Operating Info
Options
Request Info

part #	thru bore	overall diameter	overall length	min torque*	passage size	slip ring option	download
SCS-605010	---	2.680	4.070	10	0.620	---	---
SCS-608010	---	3.940	4.490	40	1.330	---	---
SCS-609010	---	4.690	4.710	60	1.830	---	---
SCS-610010	---	5.940	5.240	140	2.360	---	---
SCS-611010	---	6.440	5.400	220	2.870	---	---
SCS-613010	---	7.940	6.510	340	3.830	---	---

All dimensions are shown in inches. Click here to convert to Metric

*This is the minimum torque required to rotate based on zero pressure measured in inch-pounds

Max. Pressure¹	200 PSI (15 BAR)
Max. Vacuum¹	24 HG
Max. Rotational Speed¹	up to 75 RPM
Max. Temperature¹	230° F (110° C)²

¹Values are dependent on application parameters. Please consult with DSTI.
²High temperature applications may require alternative seal materials. Please consult with DSTI.

Connection Sizes	.75", 1", 1.5", 2", 2.5", 3" & 4" - Other sizes available upon request.
Connection Type	Tri-Clamp© connection. Metric versions available with DIN 405 threaded ferrule connections.
Plating and Coatings	Shaft/Housing: 316 Stainless Steel
Mounting Options	The SCS Series rotary unions connect at the Tri-Clamp© connection; inlet and outlet
Slip Ring Options	None